QAR: Click Here
Conditions for approval required by: Julien Gauther
Certification of Aerospace Products to international quality Standards
Form restricted to registered, logged in users. Please return to the home page and use the Create Account option.
Thread profile and dimensions shall be in accordance with ISO 5855-2. Except the thread major diameter “d max.” which shall be equal to D1 min. ? 0,025.
Thus, max major diameter = 6 – 0,035 – 0,025 = 5,940 mm.
Could you please fix this in FAIR? Hopefully, actual values are below 5,940 mm.
Fillet between head and shank: A and B dimensions have been inverted.
Many thanks in advance,
Best regards,
Julien
Good Morning Julien,
The dimension of the top of the thread is not truncated at Øshaft – 0.025mm because we are in a repair dimension configuration, D1 is modified to be Ø6.3, which would give us a maximum external thread Ø of 6.240, inconsistent with an MJ6x100 – 4h6h thread according to ISO5855-2.
A & B updated.
Have a nice day.
best regards,
Quentin
Good morning Quentin,
My apologies, indeed, EN4072-063014AE is a first oversize bolt.
I forgot this particularity when reviewing dimensional report.
Thanks for these detailed answers.
Approved from my side.
Best regards,
Julien