TCM 1 482-2-2 -(MCR)- Blanc Aero Industries – LISI – Villefranche de Rouergue (FR) Lisi Villefranche Relocation

QAR: Click Here
Conditions for approval required by:  Heinrich Hackmann

3 Replies to “TCM 1 482-2-2 -(MCR)- Blanc Aero Industries – LISI – Villefranche de Rouergue (FR) Lisi Villefranche Relocation”

  1. Comments to LISI QTR LISI Report
    LISI VDR Move to VDR 1
    Blanc Aero Industrie
    Rue Jean Vaurs
    12200 Villefranche De Rouergue
    EF No. 27 888 rev.1 “Crimping Process Qualification Transfer” – Nut Nickel Base

    General Comments:
    Due to the missing information regarding the mentioned Standard AS 62302-62349 it is not possible to check and agree this manufacturing process. These standard is not listed in the Airbus data file. (Normmaster which is also used at Airbus commercial)
    In addition it is not possible to have details of the technical specification and therefore I took the ASD-STAN technical specification used for such nut standards.
    EN 3005
    Aerospace series .
    Nuts, self­locking, MJ threads, in heat resisting nickel base alloy NI­PH1302 (Waspaloy),
    silver plated or uncoated .
    Classification: 1 210 MPa (at ambient temperature)/730 °C . Technical specification;

    Following the para’s. in EN3005 which are subject of the crimping process , evidence to the following subjects as referenced in the para. of EN 3005 should be given in the LISI report.
    Para: 5.3.4; 5.4.2; 5.4.3;.5.4.4; 5.4.5 etc.

    Dimensional check of nut (drawing with dimensions before and after crimping)
    Figure or photos of Permanent set test; Test mandrel
    Figure or photos of crimping device including P/N of device and datum of last check.

    Information to which standard the tests were performed (e.g. Accelerated Vibration test to ISO 8642 or equivalent as referenced in EN 3005)

    Clarification required regarding the designation in on different P/N ( part designations)
    Standard referenced in the Lisi document 27-888 show AS 62300-62349; The LISI report ref.25071996677, Self Locking Torque Test make reference to AS 62302.

    Heinrich Hackmann
    Senior Expert
    Mechanical / General Systems
    Material & Processes; TEIM
    Airbus Defence and Space
    T: +49 (0) 8459 81 78577
    M: +49 015116831179
    F: +49 (0) 8459 81 78102

    1. This specific file has a Customer plan and cannot be distributed externally
      I checked this day at LISI this file, and I validate it.
      Thank you to validate with this plan AS62302-62349 belonging to SAE ITC (SBAC organization)

      1. sorry there are no more pieces to take pictures
        for the dimensional reading please find it attached

Leave a Reply

Your email address will not be published. Required fields are marked *

Form restricted to registered, logged in users. Please return to the home page and use the Create Account option.