QAR: Click Here
Conditions for approval required by: Julien Gauther
Certification of Aerospace Products to international quality Standards
Certification of Aerospace Products to international quality Standards
Form restricted to registered, logged in users. Please return to the home page and use the Create Account option.
In QTR, average tensile load for MJ8 is wrong.
However, individual values are compliant.
Could you just please correct average value?
In PFCs, Tech. spec revision number written is “P2”. Could you please clarify?
The latest issue of EN3833 is: EN 3833:2019 (in July).
EN3833 edition P2 was published in November 2004.
EN3833 edition P3 was published in April 2019.
Which revision shall be considered for EN3832-060 and EN3832-080 bolts?
In CoC lot number 769220, we can see that Tech. spec. revision date is 01/05/05.
Could you please clarify?
In CoC lot number 769220, grain size requirement is not really clear as we read “>= & =5”.
FPI on EN3832-080: 50 were rejected after FPI (laps on threads). Could you just please confirm that these 50 bolts have been scrapped?
Many thanks,
Best regards.
In QTR, average tensile load for MJ8 is wrong.
However, individual values are compliant.
Could you just please correct average value?
Corrected.
In PFCs, Tech. spec revision number written is “P2”. Could you please clarify?
The latest issue of EN3833 is: EN 3833:2019 (in July).
EN3833 edition P2 was published in November 2004.
EN3833 edition P3 was published in April 2019.
Which revision shall be considered for EN3832-060 and EN3832-080 bolts?
EN3832-080 tech spec revision P2
EN3832-060 tech spec revision P3
We have reviewed revision P3 when we received it. There isn’t any affect on product only minor editorial changes made.
In CoC lot number 769220, we can see that Tech. spec. revision date is 01/05/05.
Could you please clarify?
01/05/05 is not the tech spec revision. It is the revision of drawing (EN3832).
In CoC lot number 769220, grain size requirement is not really clear as we read “>= & =5”.
I have re-printed CoC and uploaded to additional data section. Unfortunately I couldn’t upload it to the ASD Cert web-site. But Ican send it to you with an-email.
FPI on EN3832-080: 50 were rejected after FPI (laps on threads). Could you just please confirm that these 50 bolts have been scrapped?
I confirm that all rejected parts have been scrapped.
Best Regards
I have uploaded CoC
Many thanks for replying.
Updated CoC lot number 769220 is available in “Additional documents” section.
So, fien for me now.
Best regards.