TCM 1 392-1-8 LISI Aerospace [Bestas] Gazemir (TR) EN3820-030, -040, -050, -060, -080

QAR: Click Here
Conditions for approval required by: Heinrich Hackmann

2 Replies to “TCM 1 392-1-8 LISI Aerospace [Bestas] Gazemir (TR) EN3820-030, -040, -050, -060, -080”

Heinrich Hackmann says:

30/01/2020 at 11:07 am

Comments to LISI
EN3820 ; ASD-Cert 392-1-8
QTR 005-18 ; issue August 2018

Annex 2; Micostructure EN3820-030
Please confirm that the findings do not have any influence of the performance of the part. In normal case a “Scale” is added to the photos.

Thread
Note: Picture see separate E-Mail 30.01.2020

Under Head Radius
Note: Picture see separate E-Mail 30.01.2020

Heinrich Hackmann
Airbus Defence and Space
Rechliner Straße
85077 Manching
Date: 27.01.2020

Reply
1. Alper BUYUKTUNA says:
  
  05/02/2020 at 12:57 pm
  
  Hello Heinrich,
  
  I confirm that all findings are acceptable as per ISO9152 Table-10 Figure5-6-7-8. Also findings doesn’t have an influence on product performance. All metallurgical examinations are conforms to ISO9152 and EN3820 requirements.
  
  Note: Me or my colleagues haven’t received any e-mail from you for the pictures.
  
  Best Regards
  
  Alper
  
  Reply