TCM 2 1491-(R) – Howmet Fixations Simmonds – St Cosme en Vairais (FR) PQ211

3 Replies to “TCM 2 1491-(R) – Howmet Fixations Simmonds – St Cosme en Vairais (FR) PQ211”

1. Dear all,
   QTP, clause 4: EN3034-050 is mentioned. I think this is a typo.

   Raw materials for nuts and /or captive washers: SAM0049 does not call out any references to EN 2399, EN 3638 or EN 3639.

   Hardness test: no actual values are listed in hardness test box and in this box, units are HV.
   However, we do have hardness test results in “Métallurgie” box. Values are in HRC units and in line with EN3152. Just something to point out.

   Many thanks in advance
   Best regards
   Julien

   Reply

   1. QTP, clause 4: EN3034-050 is mentioned. I think this is a typo.

      See QTP Updated

      Raw materials for nuts and /or captive washers: SAM0049 does not call out any references to EN 2399, EN 3638 or EN 3639.

      For the washer the required raw material is FE-PA92HT per EN 3638 . For this raw material , the standard TR3791 gives equivalence between FE-PA92HT and A286 per AMS5525 ( See document TR3791 highlighted page 8 table 2 enclosed) . So the CoC of the supplier of the washer raw material – AT 1448830 – ( see AT1448830 raw material CoC highlighted enclosed ) certified that the raw material is compliant with AMS5525. Our internal supplier specification SAM0049 make also the link with AMS5525 ( See SAM0049 highlighted)

      For the nut the required raw material is FE-PA92HT per EN 3638 . For this raw material , the standard TR3791 gives equivalence between FE-PA92HT and A286 per AMS5525 ( See document TR3791 highlighted page 8 table 2 enclosed) . So the CoC of the supplier of the nut raw material – AT 1622627 – ( see AT1622627 raw material CoC highlighted enclosed ) certified that the raw material is compliant with AMS5525. Our internal supplier specification SAM0049 make also the link with AMS5525 (See SAM0049 highlighted)

      Geneviève Lacombe/Nadege Richard

      Reply

2. Dear all,
   Everything is clear for me now, so, approved from my side.
   Thank you
   Best regards
   Julien

   Reply