QAR: Click Here
Conditions for approval required by: Heinrich Hackmann
Certification of Aerospace Products to international quality Standards
Form restricted to registered, logged in users. Please return to the home page and use the Create Account option.
Comments to LISI
EN4135 ; ASD-Cert 392-1-13
QTR 008-18 ; issue September 2018
1. Annex 1 Mechanical Test Results; Tensile Test EN 4135-080
Please check if the “Minimum Tensile Requirement (KN) 35kN is correct. ISO 9152 require 46kN as a minimum.
2. Annex 4 Statement of Inspection (general)
For the Tensile Test on Finish Good the results are marked with
e.g. NF means “No Failure”
HR means “Head rupture”
What the abbreviation for “TR” ?
Heinrich Hackmann
Airbus Defence and Space
Rechliner Straße
85077 Manching
Date: 30.01.2020
Hi Heinrich,
1. Minimum tensile requirement for diameter 8 is 46kN. I have made a typo error on annex-1 requirement should be 46 instead of 35. You can see correct requirement (46kN mi.) on Annex-4
2. TR means thread failure. Actually laboratory techician should indicate it as TF but as an old habit he have indicated it as TR.