TCM 2 1402-(R) – LISI Aerospace [Bestas FTB] Gaziemir (TR) PQ477

3 Replies to “TCM 2 1402-(R) – LISI Aerospace [Bestas FTB] Gaziemir (TR) PQ477”

1. EN2870H050013F:
   In FAI report, thread major diameter tolerance is 4,85 to 5,00 mm. As per EN2870, maximum thread major diameter is equal to D1min – 0,025 = 5 – 0,022 – 0,025 = 4,953 mm.
   Hopefully, actual values are in line with this maximum. Could you just please take this into account?

   EN2870-080010F:
   In FAI report, thread major diameter tolerance is 7,82 to 8,00 mm. As per EN2870, maximum thread major diameter is equal to D1min – 0,025 = 8 – 0,028 – 0,025 = 7,947 mm.
   Hopefully, actual values are in line with this maximum. Could you just please take this into account?

   EN2870H120042F:
   In FAI report, thread major diameter tolerance is 11,788 to 12,00 mm. As per EN2870, maximum thread major diameter is equal to D1min – 0,025 = 12 – 0,034 – 0,025 =11,941 mm.
   Hopefully, actual values are in line with this maximum. Could you just please take this into account?

   Many thanks in advance
   Best regards
   Julien

   Reply

   1. Hello Julien,

      I have uploaded corrected FAIR reports to the ASD website.

      Thanks.
      Best Regards.

      Reply

2. Hello Buse,
   Many thanks for your speed!
   All is clear for me now, so, approved from my side.
   Have a nice day
   Best regards
   Julien

   Reply