QAR: Click Here
Conditions for approval required by: Julien Gauther
Certification of Aerospace Products to international quality Standards
Certification of Aerospace Products to international quality Standards
Form restricted to registered, logged in users. Please return to the home page and use the Create Account option.
EN2859-060 CoC: « qtr-coc-EN2859-0600080-1 » title should be replaced by “qtr-coc-EN2859-060008-1”.
This document uploaded on ASD-CERT seems to be “empty”. Could you please fix this?
Moreover, since EN2859-060008 is too short to be tensile tested, renewal should be restricted to length range from 004 to 015.
EN2859-060 thread length is equal to 10 mm. Thus, this thread length is in line with ISO7689, clause 5.4.1 sub-clause d) (1,5×6 = 9 mm) and long enough to carry out this test on bolts.
Many thanks in advance,
Best regards,
Julien
Q :EN2859-060 CoC: « qtr-coc-EN2859-0600080-1 » title should be replaced by “qtr-coc-EN2859-060008-1”.
A: done
Q : This document uploaded on ASD-CERT seems to be “empty”. Could you please fix this?
A: There is an issue with the system. The file is ok during the transfer but becomes empty when I stamp it with the ” validation stamp”… Then the file has been dowloading but wihtout stamp.
Q : Moreover, since EN2859-060008 is too short to be tensile tested, renewal should be restricted to length range from 004 to 015.
EN2859-060 thread length is equal to 10 mm. Thus, this thread length is in line with ISO7689, clause 5.4.1 sub-clause d) (1,5×6 = 9 mm) and long enough to carry out this test on bolts.
A: Tensile test has been made on the wire ( see results that had been added in the additional document )
In addition , in order to extend the accreditation for longer lengths , a CoC with
tensile test results has been added in additional field .
Many thanks to Daniel and AHG’s team.
All is clear for me now, so, approved from my side.
Best regards.
Julien