QAR: Click Here
Conditions for approval required by: Julien Gauther
Certification of Aerospace Products to international quality Standards
Form restricted to registered, logged in users. Please return to the home page and use the Create Account option.
In QTR, 100% load test results seem to be missing. However, we do have both 80% and 100% load tests values in test report. Just something to point out, not blocking.
In QTR, clause 1.3.1, locking torque tests, 15 cycles. Why do we have synthetic oil lubrication? As per ISO7481, table 1, no additional lubrication is needed for locking torque test on this bolt/nut combination (nut: cadmium plated steel and dry film lubricant / bolt: cadmium plated steel).
In addition, for single cycle test, no lubrication has been done according to test report, which is in line with ISO7481.
Test report: hardness test results are shown in “Métallurgie” section, but not in “hardness section”. Apparently, there is a recurring glitch in a software. Not blocking.
Many thanks in advance
Best regards
Julien
Hi Mr. Gauther,
On behalf of Mrs. Lacombe, please find our answers :
In QTR, 100% load test results seem to be missing. However, we do have both 80% and 100% load tests values in test report. Just something to point out, not blocking.
OK Fine
In QTR, clause 1.3.1, locking torque tests, 15 cycles. Why do we have synthetic oil lubrication? As per ISO7481, table 1, no additional lubrication is needed for locking torque test on this bolt/nut combination (nut: cadmium plated steel and dry film lubricant / bolt: cadmium plated steel).
It is a typo in the QTR 7504, we have updated ( see the QTR7504 A enclosed)
In addition, for single cycle test, no lubrication has been done according to test report, which is in line with ISO7481.
Test report: hardness test results are shown in “Métallurgie” section, but not in “hardness section”. Apparently, there is a recurring glitch in a software.
Not blocking.
Many thanks in advance
Geneviève/Nadège
Dear Mrs. Richard, Mrs. Lacombe,
Many thanks for updating.
All is fine for me now, approved from my side.
Best regards
Julien