QAR: Click Here
Conditions for approval required by: Julien Gauther
Certification of Aerospace Products to international quality Standards
Form restricted to registered, logged in users. Please return to the home page and use the Create Account option.
EN2870H050013F:
In FAI report, thread major diameter tolerance is 4,85 to 5,00 mm. As per EN2870, maximum thread major diameter is equal to D1min – 0,025 = 5 – 0,022 – 0,025 = 4,953 mm.
Hopefully, actual values are in line with this maximum. Could you just please take this into account?
EN2870-080010F:
In FAI report, thread major diameter tolerance is 7,82 to 8,00 mm. As per EN2870, maximum thread major diameter is equal to D1min – 0,025 = 8 – 0,028 – 0,025 = 7,947 mm.
Hopefully, actual values are in line with this maximum. Could you just please take this into account?
EN2870H120042F:
In FAI report, thread major diameter tolerance is 11,788 to 12,00 mm. As per EN2870, maximum thread major diameter is equal to D1min – 0,025 = 12 – 0,034 – 0,025 =11,941 mm.
Hopefully, actual values are in line with this maximum. Could you just please take this into account?
Many thanks in advance
Best regards
Julien
Hello Julien,
I have uploaded corrected FAIR reports to the ASD website.
Thanks.
Best Regards.
Hello Buse,
Many thanks for your speed!
All is clear for me now, so, approved from my side.
Have a nice day
Best regards
Julien