QAR: Click Here
Conditions for approval required by: Julien Gauther
Certification of Aerospace Products to international quality Standards
Form restricted to registered, logged in users. Please return to the home page and use the Create Account option.
EN2859-060 CoC: « qtr-coc-EN2859-0600080-1 » title should be replaced by “qtr-coc-EN2859-060008-1”.
This document uploaded on ASD-CERT seems to be “empty”. Could you please fix this?
Moreover, since EN2859-060008 is too short to be tensile tested, renewal should be restricted to length range from 004 to 015.
EN2859-060 thread length is equal to 10 mm. Thus, this thread length is in line with ISO7689, clause 5.4.1 sub-clause d) (1,5×6 = 9 mm) and long enough to carry out this test on bolts.
Many thanks in advance,
Best regards,
Julien
Q :EN2859-060 CoC: « qtr-coc-EN2859-0600080-1 » title should be replaced by “qtr-coc-EN2859-060008-1”.
A: done
Q : This document uploaded on ASD-CERT seems to be “empty”. Could you please fix this?
A: There is an issue with the system. The file is ok during the transfer but becomes empty when I stamp it with the ” validation stamp”… Then the file has been dowloading but wihtout stamp.
Q : Moreover, since EN2859-060008 is too short to be tensile tested, renewal should be restricted to length range from 004 to 015.
EN2859-060 thread length is equal to 10 mm. Thus, this thread length is in line with ISO7689, clause 5.4.1 sub-clause d) (1,5×6 = 9 mm) and long enough to carry out this test on bolts.
A: Tensile test has been made on the wire ( see results that had been added in the additional document )
In addition , in order to extend the accreditation for longer lengths , a CoC with
tensile test results has been added in additional field .
Many thanks to Daniel and AHG’s team.
All is clear for me now, so, approved from my side.
Best regards.
Julien